Wika Psi/Kpa Test Gauge Vintage Industrial Salvage

This industrial pressure gauge was made by the WIKA Company USA, probably in the 1980s or 1990s. This is a PSI & KiloPascals Test Gauge, rated up to 3,000 PSI & 20,000 kPA. This was found at a steel company outside Reading PA. The "glass" is, I think, thick & hard plastic, & it is clear & has minor scratches & blemishes. The outside case & perimeter of the gauge are in good condition. The gauge face is about 5" in diameter at the face & then the housing flares out to 5 7/8" diameter at the back, & the connector adds 1 1/2". The gauge is 3 1/4" thick & it weighs over 2 pounds. The little sticker on the front is from Calibration Seal Ltd. & says the calibration is "void if Broken", & yes the seal is broken. The small white sticker on the side says that LTI Metrology calibrated the gauge on 4/23/2004. The attached yellow tag asserts that the gauge was out of calibration as of 8-20-2005 & so it was taken out of service. FREE shipping within the United States. I'll gladly combine shipping with other items whenever possible. For shipment elsewhere, please contact me for a shipping quote. Wika Psi/Kpa Test Gauge Vintage Industrial Salvage