ICUSB2321F 1 Port FTDI USB to Serial RS232 Adapter Cable with COM Retention

The ICUSB2321F 1-Port USB to Serial RS232 Adapter Cable with ft.DI chipset and COM Retention converts an USB 1.1 or 2.0 port into an RS232 serial DB9 port to connect, monitor and control your serial devices. This compact adapter features COM retention, allowing the same COM port value to automatically be re-assigned to the port if the cable is disconnected and re-connected to the host computer, or if the system is rebooted. The ICUSB2321F uses the ft.DI chipset which supports additional customization, advanced features, and compatibility not necessarily offered by other solutions. Compatibility with a broad list of Operating Systems including Windows, Windows CE, Mac OS and Linux, makes this product easy to integrate into mixed environments. FeaturesIntegrated ft.DI USB UART Chip Baud Rate up to 115.2Kbps COM Port assignments maintained across reboot Powered by the USB port - no external power adapter required Single cable design for portability Designed to make serial port expansion quick and easy Compatible with Windows, Mac OS and Linux 6-foot cable length for connecting to devices without having to be too close USB to Straight-Through RS232 Serial Adapter 12 in. SATA to Right Angle SATA Cable SpecificationsBus Type: USB 2.0 Interface: Serial Port Style: Cable Adapter Ports: 1 Data Bits: 7, 8 FIFO: 256 Bytes Maximum Baud Rate: 115.2 Kbps MTBF: 836981.2 hours Parity: None, Odd, Even, Mark, Space Serial Protocol: RS-232 Stop Bits: 1, 2 Connector Type(s): 1 - DB-9 (9 pin, D-Sub) Male System and Cable Requirements: One USB 1.1 (or better) port Power Source: USB-Powered Humidity: 5~95% RH Operating Temperature: 0°C to 55°C (32°F to 131°F) Storage Temperature: -20°C to 85°C (-4°F to 185°F) Cable Length: 6 ft. (1.8 m) Color: Black Enclosure Type: Plastic Weight: 0.53 lbs