Truck Tire Changer Tire Changing Machine Vacuum Tire Disassembly and Assembly Machine

Product parameter: Voltage: 110V Motor power: 4KW Applicable tires: disassembly and assembly of R16 R17-9-19.5 R22.5 all series tires Rotation speed: 4 times/ min Introduction of tire disassembly and assembly machine: 1.The height of the tire disassembly machine is low(specially designed according to the diameter of the tire). It is a bit labor-saving when placing the tire. It can be placed in place with a light push. 2.The power train is equipped with a muffler to reduce noise while the power is not affected. The fuselage is small in size and light in weight and can be moved by one person so that the tire changing operation can be realized when going out. 3.The shovel tire trowel undergoes multiple processes such as cutting tempering rough grinding and fine grinding. The shovel tire shovel has high strength and does not deform. The surface smoothness of the shovel head reaches the mirror level. The shovel tire is guaranteed not to hurt the tire mouth. 4.The angle design of the tire loading arm has been simulated by the computer for many times. The design angle is very reasonable and the tire will not be injured during loading. 5.The design of the tire fixing point is reasonable,and the tire can be fixed only by gently rotating eliminating the trouble of disassembling and screwing and savingtime. Use warning: 1. Before removing the tire and installing the tire the grease must be evenly applied on the tire mouth otherwise it will easily hurt the tire mouth. 2. Before tying the tire use a shovel to shovel the tire mouth and squeeze the tire rod as flat as possible so that the shovel head and the steel ring have a gap of 0.5 cm. Damage the device. 3. The machine should not be exposed to rain to avoid damage. 4. The air compressor should be drained regularly to prevent a large amount of water from flowing into the motor and causing damage to the machine. Maintenance methods: 1. After using it a few times be sure to check the tightening of each fixing screw. Each screw must be re-tightened. Regular inspections are required in the future to prevent the screws from loosening and damaging the device. 2. The tire picking device and tire mounting device should be cleaned regularly to prevent rust. 3. Regularly fill with wind gun oil. 4. Maintenance of the machine head: after removing the inner connecting shaft add grease into it and turn the machine to lubricate the gears. Item included(033313): Techtongda R16 R17.9-19.5 R22.5 truck tire changer