Chevy Single Pass Alum Radiator and Fan Shroud Install Kt 22 Inch

Our line of universal crossflow aluminum Chevy radiators make it easy for budget-minded racers to get a professional-quality no compromises aluminum racing radiator. Performs Under Pressure Constructed of lightweight 100% aluminum we furnace braze the radiator assembly for maximum durability and performance no epoxy and gaskets here! Epoxy acts as an insulator causing radiators to heat unevenly and this stress combined with the vibration from racing can break epoxy seals and leak or separate over time. Furnace brazing minimizes fatigue from the rapid heating and cooling cycles. Since all the metal parts are fused together with a metal joint they conduct heat evenly between the tanks and the rest of the assembly preventing uneven expansion between the fused pieces keeping the joint strong. We welded a billet filler neck for a strong seal under high pressures that will outperform cast filler necks with an industry standard 1-5/8" inner cap diameter and a 1/8" NPT overflow port. Maximum Cooling Performance Our single pass design uses two rows of 1" wide aluminum tubes which have more surface area than copper radiators cooling the same as five rows of copper tubes. A dense fin structure adds an additional layer of strength to the support tubes better directs air flow and has more area to transfer heat. The core is 2.25" a perfect balance of maximizing directed airflow and heat transfer. The cross-flow design allows the radiator cap to be mounted on the low-pressure (suction) side of the system minimizing pressure on the neck assembly especially in high-RPM usage. This radiator is built for one purpose cooling your engine. No transmission cooler maximizes cooling efficiency Universal Fan Shroud These universal fit aluminum fan shroud kits can be built to fit many applications with a belt-driven fan. The adjustable collar will accommodate 15 -20 fan diameters. Measures outside spec of 19-1/2 tall x 16-3/4 wide x 2.5 deep with inside spec of 17-3/4 tall x 13 wide. Works well with Speedway & Afco 24 wide radiators and will work with the Speedway & Afco 22 wide radiators with slight trimming of the width of the shroud. Kit Includes: (1) Speedway Chevy SBC/BBC Universal Aluminum Radiator (1) High Pressure Radiator Cap 20 Lbs (1) Radiator Mounting Hardware (1) Radiator Rubber Pads (1) Aluminum Fan Shroud Kit for 22 Inch Radiator Engine Driven Fan (1) Nomex Honeycomb Radiator Guard Protector Screen Mesh 19 x 26