Cylinder Bend Tester Bending Tester Toughness Tester

Description: The instrument is widely used in coating industry used for judging the phenomenon of cracking and shedding of putty film layer after bending. The structure of the instrument is reasonable convenient and reliable. Parameters: Supporting membrane specifications: R25 R50 Formwork specifications: Shaft rod 1 length is 85mm and diameter is 100mm Shaft rod 2 length is 85mm and diameter is 50mm Sample thickness: 0.2-0.3mm (tinplate) Usage: 1. The instrument is mainly composed of Press frame and Supporting membrane. To use the Pressing roll and Press frame are first placed at the back end of the Supporting membrane so that the Supporting membrane is fully exposed. 2. Then insert the template into the small slot at the back end of the Supporting membrane and press the Eccentric axis against one end of the template with a Pressing roll. 3. Put the Press frame down and then bend the template evenly through the Mandrel on the Press frame. 4. Move the Press frame to the Locating pin and observe the physical changes on the surface of the template putty film. Item Number(239732): Techtongda Cylinder Bend Tester